High-Power Mobile Signal Jammer Applicable to Prisons, Schools, Forces, Factories

• Model NO.: WF-101K6

Product Description

Application

Especially applicable to open field, such as prisons, schools, forces, factories, etc.
Open field: 2 or 5 jammers are needed.
Prison: generally, 5 to 15 jammers are needed, depending on the height and layout of buildings, the size of supervision area and distance of base station.
School: The quantity of jammers depends on the quantity and layout of teaching buildings or dormitory buildings and the distance of base station.

Technical Parameter

A:Jamming Range: Radius of 40~120 meters (-75dBm, depending on the distance of base station in an open field)
B:Transmission Power: Integrated equipment ≥80W, 10~15W per channel
C:Types of Mobile Phone Signals: GSM, CDMA, DCS,3G (TD/CDMA2000/WCDMA), 4G(TD-LTE)
D:Other Signal Types: Wi-Fi, Bluetooth, etc.
E:Output Channel: 6 output channels

Features

Shield all 2G/3G/4G signals and jamming band can be customized;
Transmission power is 10W~15W per channel;
Each channel can work independently and On/Off individually, output power is adjustable;
Standard configurations include a set of directional antennas, Omni antenna is available according to application environment requirements;
Embedded cooling fans, ensures the stable performance of inner components;
Super-thick ventilation fins, ensures the best work state;
Sophisticated technology, aluminum alloy shell, never rust;
Continuous work, stable performance, long service life;
ISO9001:2008 quality management system;

Detailed Technical Parameter

Band parameter

Channel

Frequency

Average output power

CDMA

870~880MHz

10~15W

3G1

2010~2025MHz

10~15W

GSM

930~960MHz

10~15W

3G2

2110~2170MHz

10~15W

DCS

1805~1920MHz

10~15W

4G

2555~2655MHz

10~15W

Host size

415*175*75(protrusions excluded)

Power size

225*114*50

Package size

580*340*325(EPE+Carton)

Total weight

5.3Kg

Ambient temperature

-40ºC~55ºC

Relative humidity

35~85%

Power consumption

350W

Power input

AC 100V~240V

Power output

DC 27V/13A

Installation mode

Wall in field/Pole(with installation box)

Installation height

3~15m

Enclosure material

Aluminum alloy

 

Product Details

 

 

Installation Instructions

1) The host connects with antenna (directional antenna or Omni antenna) by six RF feeders (about 3meters long);
2) Identification on each antenna terminal (band parameter identification) must match those on antenna when connected through feeders;
3) Omni antenna should be kept vertical position, the antenna spacing is greater than or equal to 50cm;
4)Six directional antennas should toward the same goal area, the antenna facing region is main shielding area, the side and back shielding range is about 30% of the main shielding area;

 

5)Both antennas and feeders are waterproof, available to outdoors installation. The host without waterproof function should be installed inside or dry place. Or install the host outside with installation box; Omni antenna installed outside, under the roof no lightning rod needed, an open environment need to install lightning rod. The height of lightning rod should be higher than the Omni-directional antenna;
6) The host embedded with cooling fans. The higher shell temperature is normal after a long time work;
7) The installation height of Omni antenna: suggest installing in half height of shielded building or a higher position than half height;
8) The installation height of directional antenna: suggest installing in periphery of the main shielding area, height similar to the main shielding body, the directional antennas with appropriate angle turn towards the shielding areas.

OEM Customized Service

Frequency spreading can be done for Wi-Fi, GPS, Bluetooth, etc.
Silkscreen OEM service can be offered for five jammers or above.
Neutral jammers can be provided.